STICK TO FABRIC

Kite Studio's Online Catalog
... make your dreams fly!

ACCESSORIES	BOOKS	FABRIC	FRAME	FITTINGS	HARDWARE
LINE	NOTIONS	STOCK	TOOLS	TUBING	WEBBING

10% discount to members of the American Kitefliers Association

KITE STUDIO's STICK TO FABRIC FITTINGS
Typically used to connect the kite's framework to it's sail.
Often these fittings are adjustable - giving you the ability to "tighten the sail"

KITE STUDIO's CUSTOM
STICK to FABRIC FITTINGS:

Machined End Cap - Usually used with bungie attaching the fitting to the skin.
Machined Nock - Originally designed to provide a super strong nock for big sticks.
Aluminum Reverse Adjust Fitting - Adjust by turning the knurled aluminum head counter clockwise...
Bobby One Hole Fitting - Fixed & Adjustable - These are really neat fittings, invented by Bobby Stanfield. There are two kinds: Fixed and Adjustable...

All Aluminum Forward Adjustable fitting - The screw holds the fitting to the sail during disassembly; and when you turn the screw in, it essentially makes the stick longer
Aluminum Micro Static Fitting - 5/8” long with a split ring. My version of the Ron Gibian / Bobby Stanfield rivet & ring fastener...
Aluminum Static with Screw - The fitting attaches to the sail with a Gibian loop thru the split ring that’s included.
Aluminum/Epoxy Forward Adjustable fitting - To the aluminum head, I add a 2” epoxy tube as a guide for the stick; thereby allowing for a longer adjust screw.

STOCK
STICK to FABRIC FITTINGS:

WHISKER TO SAIL
The Jaco fitting is attached to the sail by by passing the fitting's "tip" through a small hole and then securing it to the sail with a small rubber o-ring (included). Sometimes a drop of super glue is required. We advise reinforcing the sail at this point with a small piece of Dacron.

CODE:	JACO BUTTON - click for picture	WHISKER SIZE"	UNIT:	RETAIL
CWHJAC08	JACO WHISKER BUTTON .08	0.08	EACH	$0.35
CWHJAC09	JACO WHISKER BUTTON .09	0.09	EACH	$0.35

The Whisker Paddle "folds over" the sail edge and snaps in place. We advise reinforcing the sail at this point point with a small piece of Dacron.

CODE:	WHISKER PADDLE - click for picture	WHISKER SIZE"	UNIT:	RETAIL
CWP08	WHISKER PADDLE .08	0.08	EACH	$0.40
CWP09	WHISKER PADDLE .09	0.09	EACH	$0.40

MOLDED END CAPS, FSD
Similar to our own machined end caps but these are molded. In addition a small groove is cut on an angle from the bungi cord hole out - making it easy to seperate the bungi from the fitting. If you don't see the size you need, consider our machined end caps - we custom machine them to fit ALL our spars.

CODE	FSD MOLDED END CAP - click for picture	SIZE"	UNIT:	RETAIL
MNCFSD08	MOLDED END CAP - HARD FLAT TOP, smallest size	.07 - .110	EACH	$0.65
MNCFSD11	MOLDED END CAP - HARD FLAT TOP	.110 - .118	EACH	$0.65
MNCFSD12	MOLDED END CAP - HARD FLAT TOP	.1250	EACH	$0.65
MNCFSD15	MOLDED END CAP - HARD FLAT TOP	.1570	EACH	$0.65
MNCFSD18	MOLDED END CAP - HARD FLAT TOP	.1800 - .1880	EACH	$0.65
MNCFSD19	MOLDED END CAP - HARD FLAT TOP	.1960	EACH	$0.65
MNCFSD23	MOLDED END CAP - HARD FLAT TOP	.2300	EACH	$0.65
MNCFSD31	MOLDED END CAP - HARD FLAT TOP	.3120	EACH	$0.65

NOCKS, STUBBY
This nock is a one piece plastic nock which will fit externally, over the spar. No adaptor is neccessary. It is geared toward safety and has a rounded end to prevent injury. It will accept either a 1/8" or 3/32" bungi cord. Sizes corespond to the spar size it will fit. This is our most popular spar nock.

CODE	STUBBY SPAR NOCK - click for picture (top)	SIZE:	UNIT:	RETAIL
NST1960	PLASTIC NOCK, STUBBY POINT	1960	EACH	$0.32
NST2100	PLASTIC NOCK, STUBBY POINT	2100	EACH	$0.32
NST2200	PLASTIC NOCK, STUBBY POINT	2200	EACH	$0.32
NST2300	PLASTIC NOCK, STUBBY POINT	2300	EACH	$0.32
NST2400	PLASTIC NOCK, STUBBY POINT	2400	EACH	$0.32
NST2540	PLASTIC NOCK, STUBBY POINT	2540	EACH	$0.32
NST3150	PLASTIC NOCK, STUBBY POINT	3150	EACH	$0.65

NOCKS, POINTED
This nock is a one piece plastic nock which will fit externally, over the spar. No adaptor is neccessary. It will accept either a 1/8" or 3/32" bungi cord. Sizes corespond to the spar size it will fit.

CODE	POINTED SPAR NOCK - click for picture (bottom)	SIZE:	UNIT:	RETAIL
NAZ18	PLASTIC NOCK, POINTED	1800	EACH	$0.28
NAZ80	PLASTIC NOCK, POINTED	1880	EACH	$0.28
NAZ19	PLASTIC NOCK, POINTED	1960	EACH	$0.28
NAZ21	PLASTIC NOCK, POINTED	2100	EACH	$0.28
NAZ22	PLASTIC NOCK, POINTED	2200	EACH	$0.28
NAZ23	PLASTIC NOCK, POINTED	2300	EACH	$0.28
NAZ24	PLASTIC NOCK, POINTED	2400	EACH	$0.28
NAZ25	PLASTIC NOCK, POINTED	2540	EACH	$0.28
NAZ26	PLASTIC NOCK, POINTED	2650	EACH	$0.28

NOCK ADAPTORS
When placing a bjorn spar nock on the end of a spar to accomodate the bungi cord, it is neccessary to reinforce the plastic nock with a nock adaptor. We are gradually eliminating the external variety as the external spar nocks and machined end caps are becoming more popular. The code numbers correspond to the spar size that they fit.

CODE	NOCK ADAPTOR	SIZE:	UNIT:	RETAIL
NNC1800	ALUMINUM POINT FITS EXTERNALY	1800	EACH	$0.30
NNC1880	ALUMINUM POINT FITS EXTERNALY	1880	EACH	$0.30
NNC1960	ALUMINUM POINT FITS EXTERNALY	1960	EACH	$0.30
NNC2100	ALUMINUM POINT FITS EXTERNALY	2100	EACH	$0.30
NNC2200	ALUMINUM POINT FITS EXTERNALY	2200	EACH	$0.30
NNC2300	ALUMINUM POINT FITS EXTERNALY	2300	EACH	$0.30
NNC2400	ALUMINUM POINT FITS EXTERNALY	2400	EACH	$0.30
NNC2540	ALUMINUM POINT FITS EXTERNALY	2540	EACH	$0.30
NNI14	ALUMINUM POINT FITS INTERNALLY	14/A20	EACH	$0.30
NNI15	ALUMINUM POINT FITS INTERNALLY	15.C30	EACH	$0.30
NNI16	ALUMINUM POINT FITS INTERNALLY	16/E40	EACH	$0.30
NNI17	ALUMINUM POINT FITS INTERNALLY	17/G50	EACH	$0.30
NNI18	ALUMINUM POINT FITS INTERNALLY	18/J65	EACH	$0.30
NNI19	ALUMINUM POINT FITS INTERNALLY	19/K75	EACH	$0.30

NOCKS, BJORN
The Bjorn Spar Nock is most often used in conjunction with the Nock Adaptor. These can also be used without the adaptor on the end of a wood dowel. Put the dowel in a pencil sharpener to create the point.

CODE	BJORN SPAR NOCK	SIZE:	UNIT:	RETAIL
NOK10	BJORN PLASTIC ARROW NOCK, POINTED	7/32 --..219	EACH	$0.12
NOK20	BJORN PLASTIC ARROW NOCK, POINTED	1/4 --.250	EACH	$0.12
NOK30	BJORN PLASTIC ARROW NOCK, POINTED	9/32 -- .281	EACH	$0.12
NOK40	BJORN PLASTIC ARROW NOCK, POINTED	5/16 -- .312	EACH	$0.12
NOK50	BJORN PLASTIC ARROW NOCK, POINTED	11/32 -- .344	EACH	$0.12

For additional "spar end fittings" go to Kite Studio's Custom Stick to Fabric Fittings


5555 Hamilton Blvd Wescosville, PA 18106 USA	Phone &Fax: 610.395.3560