PARTS LIST:
Grand-Son of Woodstock:
Kindly let me know if I missed anything or had some incorrect
quantities
Due to the complexity of this project it is advised to have a
serious talk with Tony in advance so that the fittings and special parts
required end up being correct.
Added note: all yards listed are approximate guesstimates
·
3/4 oz ripstop nylon - 10 yds
·
3/4 oz 1 edge binding FSR7510 - 50 yds
·
2.9 oz insignia FIC10 - 3 yds
·
3.9 oz dacron
x 2 DAC20 - 10 yds
·
3.9 oz dacron
x 1 DAC05 - 2 yds
·
1/2 nylon (pockets & loops) WEB650 - 10 yds
·
1/4 nylon (Gibian loops) WEB625 - 5 yds
·
3 main longerons & 1 spine - 7 (RLG2100)
& 1 (RLG2100L) linear graphite sticks
·
Fore & Aft cross sticks - 11 (RLG2100), 3
(RLG2100L), & 1 (RLG2540) linear graphite sticks
·
Misc. sticks - 2 (RET20) epoxy tube for ferrels & 1 (RSFA09)
solid fiberglass to fill in 2100 ends
·
Rotators - 6 (RLG1570), 12 (RLG1250) linear
graphite, & 5 (RSG09) solid micro carbon
·
Whiskers - 6 (RSG09) solid micro carbon
·
Vinyl End Caps - 2 (VEC210) & 12 (VEC250)
for spine, and 24 (VEC090) for whiskers
·
1/4 Aluminum washers - 12 for spine from the
Old Mans stock (call for)
·
Special Bobby 2100 one hole adjusters - 8 (call
for special order)
·
Tinkertoys - 2-3/4, 2-1, 1-1 1/2, & 1-2
(call for special order)
·
Clear Plastic Tubing - 2 feet of TCP06 for
whiskers
·
See fitting plans for description and list of
special screw style adjustable fittings required for the 4 wing and 6 longeron
stick ends (call for special order)
·
Bead Tensioners - 10 (CBEAD10) for large
rotator longerons, bottom main longeron, & 3 corners
·
APA connectors - 2 (CLEAPA2122) for tail
horizontal stick
·
Machined Pushers - 1 UHMW pusher for a 2100
stick x A20 cross hole (fore) & 1
UHMW pusher for a 2540 stick x A20 cross hole (aft)
·
Gibian style short end caps for the 3 fore cell
corners - 3 (MNCAS2100)
·
Oak Tag for patterns - 5 yds (OAK48)
·
Spray Glue - #75 repositionable 2 cans (GLU10),
& Design Master for bindings 3 cans
(GLU20)
·
Dacron Line: 250# for bridel (LDAA250), 100#
for 3 corner tensioners & bottom longeron tensioner (LDAA100), & 50#
for large rotator tensioners (LDAA50)