Kitebuilder.com

MarkS · Joined: 07 Sep 2004 Posts: 3

I was looking through the discussions for the Della Porta project for bridle & flying line specs. I am interested in building this kite but, this being my first project, was unsure of what strength of line to order.

Any ideas what strength dacron is recommended for the bridle & flying line for this particular kite?

I see that some of my store-bought kites use heavier line for the bridle, is there a rule of thumb in general for single-line kites?

Thanks,
Mark.

Progcraft · Posted: Mon Sep 20, 2004 7:37 pm Post subject:

I don't really know what the rule of thumb is, but on my Della Porta, I use 80 lb dacron for both the bridle and flying line. I've flown it to the upper limits of it's wind range (when it bends so much the fabric starts to flap) and never had a problem with the bridle.
80 lb dacron is what I use to bridle most of my kites with as well.

Cheers,
P.
_________________
There is no box.
Children of the Wind Kite Festival
http://www.windykids.ca/

kiteguy · Posted: Mon Sep 20, 2004 9:08 pm Post subject:

KiteSquid · Posted: Tue Sep 21, 2004 7:00 am Post subject:

For most of my kites I use either the cut off bits of line from my lost Rokkaku battles Shocked

or for a highter tech line I use Braided Dacron with a Spectra core. Look at the high end sport kites in manufacture to see this line.

I used to make it myself by threadidng the Spectra thru the braided Dacron but I found it at an online kite parts seller...
_________________
VR/
KiteSquid
AKA TakoIka
AKA Harold
King George VA

P.S. Yet another post by the Squid..... Shocked

Doesent he ever shut up???

P.P.S. The wind is like the air, only pushier.