Kitebuilder.com's

knotronda · Posted: Mon Mar 08, 2004 4:54 am Post subject:

Dorsal, play nicely! Thank you for sharing.

knot(ty)ronda

Dennist3 · Posted: Tue Mar 16, 2004 11:47 am Post subject:

After reading what you guys wrote I splurged and got a diamond wheel for my dremel....I LOVE IT!!!!!! cuts anything like butter!!!

get your self one and try it...not to mention they are very durable compared to the brittle ones I had been using

Dennis Dancing

Kitesquid · Posted: Tue Mar 16, 2004 2:17 pm Post subject:

That is what I wanted to hear.....

Now I gotta order some...

Where did you get yours? I assume Harbour Freight...
_________________
VR/
KiteSquid
AKA TakoIka
AKA Harold
King George VA

P.S. The wind is like the air, only pushier.

Dennist3 · Posted: Tue Mar 16, 2004 4:43 pm Post subject:

actually I just went and picked one up from Home Depot only cost about 10 dollars......

Dennis

Kitesquid · Posted: Tue Mar 16, 2004 8:16 pm Post subject:

Home Depot.... Here I come.....
_________________
VR/
KiteSquid
AKA TakoIka
AKA Harold
King George VA

P.S. The wind is like the air, only pushier.

NPWBill · Joined: 08 Mar 2004 Posts: 6 Location: Phoenix. Az

Hey guys!!!

Harbor Freight has the diamond wheels on sale right now... and for the rest of the month for $4.99!! Just got the catalogue.... that's half off and a lot less than Dremel gets for theirs!
Here's their 800 number.... 800-423-2567

Cheers!! Bill
_________________
Have at it!!

NPWBill

CJQ · Posted: Sat Apr 03, 2004 10:05 am Post subject: Harbor freight sale

HI Bill, I was in harbor freight yesterday afternoon , I have seen the diamond cutting wheels in there . They are in a 5 or 6 pack with a 1/8 in. mandrel for 9.95 $ u.s. . Thier diameter is about 3/4 in and i had a concern about the size. have you had any experince with them . I have a genuine dremmel diamond wheel that is 1 in. dia. but was very pricy 14.95 $ u.s. . It works just fine.I would recomend the dremmel except for the cost.

NPWBill · Joined: 08 Mar 2004 Posts: 6 Location: Phoenix. Az

I just got the catalogue this last Thursday and will visit Harbor Freight Mon or Tues. I need a 4-jaw chuck for my 9x20 Metal Lathe too, so I HAVE to go... Will let ya know how good they are by Wed or Thurs...

Bill
_________________
Have at it!!

NPWBill

Grant L · Posted: Fri Apr 09, 2004 10:22 pm Post subject:

I looked on line and found out that we had a harbor freight right here in town, ( and only about 10 minutes from work.) So I stopped by today and got the diamond cut off wheels for $2.49 a pack Shocked

I had to buy two for that price. Thanks for the heads up guys. Very Happy

NPWBill · Joined: 08 Mar 2004 Posts: 6 Location: Phoenix. Az

Chuckle... Ya got out of there without spending money like sea water in the Pacific Ocean?!!
I can't get out of there without dropping least a hundred bucks per visit on stuff, (not to mention the lathe(s) yes... a mini 7x10, and a 9x20, and a milling machine amongst other things for the business) and all those other goodies!! Congratulations on your restraint!!! Good on you.
Well... ya got the cutters, and they are a bit small, but do the job well for the price.
I will also mention a small cutt-off saw..... a small 4" grinder conversion to a chop saw. $30.... Will cut anything you want and even takes on half inch steel pipe, let alone Carbon spars.

Cheers! Bill
_________________
Have at it!!

NPWBill